Seconds Outlet

Includes 1 random whale tail.

Pieces measure between 3.5-4.5in wide x 5-6in tall.

*This piece has cracks, please refer to photo.

This Vessel measures 18" tall and is 10" in diameter

*Cracked and repaired with special glass epoxy.

This sculpture measures w 5" x h 5"

This glassblown initial adds a touch of femininity to any decor. Take a risk and make a bold statement with this unique piece. 

Inspired by ancient Grecian vessels that were discovered in the depths of the Mediterranean Sea. Each clinging starfish, is hand sculpted with a thick layer of clear glass applied over the color, making the starfish appear wet.

This vase measures 18" tall and is 9" in diameter

*Cracked and repaired with special glass epoxy.

Includes 1 votive.

These blue votives measure about 2.75 inches tall by 4 inches wide. 

They are very thick glass. And the ribs on the votive are created by putting the molten bubble into a mold. Then the bubble is broken off the blowpipe and the hole in the top is opened up.

These could also be used as small bud vases.

*They don't fit a standard votive candle.

This piece measures 4" wide and 1.5" tall

I made this oil lamp after seeing a picture of one that was discovered on the bottom of the Mediterranean Sea off the coast of Egypt. Supposedly it was thousands of years old!

I also liked the form of the lamp; I never see it in glass. The lid of this piece is fused on so it does not come off. This is not a functioning oil lamp, but a decorative piece for an eclectic decor.

The piece measures about 8” tall and 11.5” wide.

*This piece has cracks, please refer to photos.

This handblown cobalt vase measures at 3.5” x 4”.

The blown pendants each measure about 6in tall by 4 1/2in wide.

*Not damaged.

Sculpted mushrooms seen often in Humboldt County, California.

Measures: 10.5” x 11”

*Glued base with blemish on top.

This Mermaid sculpture measures w:6.25" x h:9.25"

An early sketch and attempt of a mermaid sculpture.

This Dolphin sculpture measures w:7" x h:22.5"

 *Cracked and repaired with special glass epoxy.

Includes 1 random votive.

These votives measure between 4in wide x 3.25-4in tall.

This bell measures 7.75" diameter and is 4.75" tall.

I experimented with a few bells, there is a hole at the top of this bell for the clapper/uvula to be attatched.